Select Category
3

Products

Products
 
 
 
 
 
 
 
 
 
 
 
 
 
     
     
     
     
     
     
     
     
    Eucpixsh

    Features

    • 89 dB SPL 1W / 1m average sensitivity
    • 25,4 mm (1 in) copper voice coil
    • 120W program power handling
    • Weather protected cone
    • Ideal for compact two way and multiway systems
    The 5W430 is a 5 inch woofer designed for low frequency reproduction in 2-way systems or multiway systems where high intelligibility is required. The speaker has been specifically designed for compact reflex enclosures. It is also currently used in line array or multiway systems with excellent results. The 25.4 mm ( one inch) voice coil is made from copper wire and assures linearity and consistent power handling. The polypropilene cone and half roll rubber suspension makes the transducer suitable for outdoor use in adverse weather conditions.

    Specifications

    Design

    Parameters

    Mounting and Shipping Info

    • Nominal Diameter125 mm ( in)
    • Nominal Impedance8 Ω
    • Nominal Power Handling180 W
    • Continuous Power Handling2120 W
    • Sensitivity389.0 dB
    • Frequency Range60 - 8000 Hz
    • Voice Coil Diameter25 mm (1.0 in)
    • Winding Materialcopper
    • Surround ShapeHal roll - Rubber
    • Resonance Frequency52 Hz
    • Re5.4 Ω
    • Qes0.36
    • Qms2.77
    • Qts0.32
    • Vas15.0 dm3 ( ft3)
    • Sd90.0 cm2 (13.95 in2)
    • Xmax0.0 mm
    • Mms8.2 g
    • Bl6.3 Txm
    • Le0.49 mH
    • EBP144 Hz
    • Overall Diameter134 mm (5.28 in)
    • Bolt Circle Diameter140 mm (5.51 in)
    • Baffle Cutout Diameter124.0 mm (4.88 in)
    • Depth72 mm (2.83 in)
    • Flange and Gasket Thickness4 mm (0.16 in)
    • Net Weight1.2 kg (2.65 lb)
    • Shipping Units12
    • Shipping Weight1.8 kg (3.97 lb)
    • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated nominal impedance. Loudspeaker in free air.
    • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
    • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.